The Xvive U2 system offers four channel choices at 2.4 GHz, and up to 100ft line-of-sight range. You can use up to 4 sets of transmitters and receivers with multiple instruments in the same setting, or you can assign multiple receivers to the same channel and use a single transmitter. • Up to 100ft/30 metre line-of-sight transmission range • Frequency Response: 10Hz-20kHz -Delay time: <6ms • Resolution: 24-bit Delta Sigma, 2.4GHz broadcast • A/D conversion: 24-bit low-noise system • Play Time: Approx. 5 hours Recharge Time: Approx. 2 hours • Input/Output: Side-mounted 1/4-inch Jack connector • Use with any Hi-Z 1/4-inch instrument output • Colour: Carbon
Extremely Simple Design
The compact size and ergonomic design of the U2 make it a comfortable fit with any guitar, bass, amplifier or pedalboard. The transmitter and receiver can be stored and transported in a gig bag or guitar case. Because the units are foldable, they don't protrude when plugged into a guitar, amp, or pedal. The U2 is designed to fit comfortably into any output jack, whether it’s on the front of your guitar (e.g. Stratocaster, Jazz or Precision bass) or on the side of your instrument (e.g. Telecaster, Les Paul).
Compare the U2 to an instrument cable—you won’t hear a difference in tone, and you won't feel a difference in response! For guitarists, nothing is more important than tone. The Xvive U2 is the only system that delivers your tone without compression or tonal compromise. The U2 has a wide frequency response, next-generation audio technology, and better dynamic range than other wireless systems; this means you can literally plug in and forget about it.
Fast and Simple Recharging
One way of getting around the continuous expense and environmental cost of using batteries is to use rechargeables. But still, dealing with rechargeable batteries is a hassle. With the U2, you can easily recharge the onboard power by using the included Y cable with any USB outlet or power adapter, the same way you charge your mobile phone. The U2 offers up to five hours of play time with a full charge, and you can partially charge the units between sets if necessary!
Please note: The U2 system works perfectly with guitars/basses with passive pickups. It also works great with active pickups—however, some active pickups may cause high-frequency noise when used with the U2, if your control cavity is not properly shielded. If necessary, lining the cavity with copper EMI shielding tape, or painting it with conductive shielding paint, should resolve any noise issues with the U2 and active pickups,